2003 HTML Instructions for Form 5307,

This is archived information that pertains only to the 2003 Tax Year. If you
are looking for information for the current tax year, go to the Tax Prep Help Area.

Table of Contents

Line 1a. Enter the name, address, and telephone number of the plan sponsor/employer. A plan sponsor means:

In the case of a plan that covers the employees of one employer, the employer;
In the case of a plan sponsored by two or more entities required to be combined under sections 414(b), (c) or (m), one of the members participating in the plan; or
In the case of a plan that covers the employees and/or partner(s) of a partnership, the partnership.

The name of the plan sponsor/employer should be the same name that was or will be used when the Form 5500 or Form 5500-EZ is filed for the plan.

Address. Include the suite, room, or other unit number after the street address. If the Post Office does not deliver mail to the street address and the plan has a P.O. box, show the box number instead of the street address. The address should be the address of the sponsor/employer.

Line 1b. Enter the 9-digit employer identification number (EIN) assigned to the plan sponsor/employer. This should be the same EIN that was or will be used when the Form 5500 or Form 5500-EZ is filed for the plan. Do not use a social security number or the EIN of the trust.

File Form SS-4, Application for Employer Identification Number, to apply for an EIN. Form SS-4 can be obtained by calling 1-800-TAX-FORM.

The plan of a group of entities required to be combined under section 414(b), (c), or (m) whose sponsor is more than one of the entities required to be combined should only enter the EIN of one of the sponsoring members. This EIN must be used in all subsequent filings of determination letter requests and annual returns/reports unless there is a change of sponsor.

Line 1c. Enter the two digits representing the month the employer's tax year ends. This is the employer whose EIN was entered on line 1b.

Line 2. The contact person will receive copies of all correspondence as authorized in a power of attorney, Form 2848, or other written designation. Either complete the contact's information on this line, or check the box and attach a power of attorney or other written designation.

Line 3a. Enter the number(s) that correspond to the request(s) being made.

Enter 1 if the IRS has not issued a determination letter for this plan.

Enter 2 if the IRS has previously issued a determination letter for this plan and enter the date the plan was signed.

In addition, enter the date the plan or amendment was signed. If a plan or amendment is proposed, enter 9/9/9999. Enter the effective date where requested. The term “Date amendment effective” means the date the amendment becomes operative or takes effect.

Enter 3 if this is a standardized plan. You must also enter a "1" or "2" and the appropriate dates in the space provided.

Line 3b. If you do not have a copy of the latest determination letter, or if no determination letter has ever been received by the employer, submit copies of the initial plan (or adoption agreement), or the latest plan (or adoption agreement) for which you do have a determination letter, and any subsequent amendments and/or restatements.

Line 3c. Section 3001 of ERISA requires the applicant to provide evidence that each employee who qualifies as an interested party has been notified of the filing of the application. If “Yes” is checked, it means that each employee has been notified as required by Regulations section 1.7476-1 or this is a one-person plan. A copy of the notice is not required to be attached to this application. If “No” is checked or this line is blank, your application will be returned.

Rules defining "interested parties" and the form of notification are in Regulations section 1.7476-1. For an example of an acceptable format, see Rev. Proc. 2001-6, 2001-1 I.R.B. 194

Line 4b. Enter the three-digit number, beginning with "001" and continuing in numerical order for each plan you adopt (001-499). This numbering will differentiate your plans. The number assigned to a plan must not be changed or used for any other plan. This should be the same number that was or will be used when the Form 5500 or Form 5500-EZ is filed for the plan.

Line 4c. Plan year means the calendar, policy, or fiscal year on which the records of the plan are kept.

Line 4e. Enter the total number of participants. A participant means:

The total number of employees participating in the plan including employees under a section 401(k) qualified cash or deferred arrangement who are eligible but do not make elective deferrals,
Retirees and other former employees who have a nonforfeitable right to benefits under the plan, and
The beneficiary of a deceased employee who is receiving or will in the future receive benefits under the plan. Include one beneficiary for each deceased employee regardless of the number of individuals receiving benefits.

Example:

Payment of a deceased employee's benefit to three children is considered a payment to one beneficiary.

Line 5. Cash balance plan. For this purpose, a "cash balance" formula is a benefit formula in a defined benefit plan by whatever name (e.g., personal account plan, pension equity plan, life cycle plan, cash account plan, etc.) that rather than, or in addition to, expressing the accrued benefit as a life annuity commencing at normal retirement age, defines benefits for each employee in terms more common to a defined contribution plan such as a single sum distribution amount (e.g., 10 percent of final average pay times years of service, or the amount of the employee's hypothetical account balance). Use Form 5300 rather than Form 5307, to request a letter for a cash balance plan.

Lines 6a and 6b. If the plan employer is a member of a controlled group of corporations, trades or businesses under common control, or an affiliated service group, all employees of the group will be treated as employed by a single employer for purposes of certain qualification requirements.

Attach a statement showing in detail:

All members of the group;
Their relationship to the plan employer;
The type(s) of plan(s) each member has, and
Plans common to all members.

Note.

If you want to apply for a determination letter to determine if you are a member of an affiliated service group, file Form 5300 instead of Form 5307.

Line 7d. Answer this "Yes" if you have selected any choice labeled "Other" in the adoption agreement..

Line 9a. If "Yes" is checked, attach a list for each plan, which includes the following information:

Name of plan,
Type of plan,
Form of plan (standardized or nonstandardized),
Plan number,
Vesting schedule,
Whether the plan has received a determination letter or an application for a letter is pending with IRS.

Note.

Also indicate if the plan is paired (if paired, indicate the letter serial number of the paired plan).

Lines 9b and 9c. See M-8, M-12, and M-14 of Regulations section 1.416-1.

Line 10a. Section 411(d)(6) protected benefits include:

The accrued benefit of a participant as of the later of the amendment's adoption date or effective date; and
Any early retirement benefit, retirement-type subsidy or optional form of benefit for benefits from service before such amendment.

If the answer is “Yes,” explain on an attachment how the amendment satisfies one of the exceptions to the prohibition on reduction or elimination of section 411(d)(6) protected benefits.

Optional Ratio Percentage Test Determination

Line 11. This question may be used to request an optional determination regarding the ratio percentage test under Regulations section 1.410(b)-2(b)(2). If "No" is checked and a request for a determination regarding the average benefit test is not made on Schedule Q, the determination letter for the plan will not be a determination regarding section 410(b). If "No" is checked but a request for a determination regarding the average benefit test is made on Schedule Q, the determination letter for the plan will also be a determination regarding the average benefit test. Plans using the qualified separate lines of business rules of section 414(r) must file Schedule Q if a determination is desired that the plan satisfies the gateway test of section 410(b)(5)(B) or the special requirements for employer wide plans.

Line 11a. If a determination is being requested and the plan is disaggregated into two or more separate plans, that are other than profit-sharing and/or sections 401(k) and/or 401(m) plans, complete lines 11b through 11n with respect to each disaggregated portion of the plan. Attach additional schedules as necessary to identify the other disaggregated portions of the plan. Provide the requested coverage information, in the same format as line 11, separately with respect to the other portions of the plan, or to otherwise show that the other portions of the plan separately satisfy section 410(b).

Example.

If this plan benefits the employees of more than one qualified separate line of business (QSLOB), the portion of the plan benefiting the employees of each QSLOB is treated as a separate plan maintained by that QSLOB and must separately satisfy section 410(b) unless the employer-wide plan testing rule in Regulations section 1.414(r)-1(c)(2)(ii) applies.

If a determination is being requested for a section 401(k) and/or 401(m) plan you must complete line 11l for the portion of the plan that is not a section 401(k) or a 401(m) plan. Also complete line 11m(1) to report the ratio percentage for the section 401(k) portion of the plan and line 11m(2) to report the ratio percentage for the section 401(m) portion of the plan.

Line 11c. If, for purposes of satisfying the minimum coverage requirements of section 410(b), you are applying the daily testing option in Regulations section 1.410(b)-8(a)(2) or the quarterly testing option in Regulations section 1.410(b)-8(a)(3), or, if you are using single-day "snapshot" testing as permitted under section 3 of Rev. Proc. 93-42, 1993-2 C.B. 540, enter the most recent eight-digit date (MMDDYYYY) for which the coverage data is submitted. If you are applying the annual testing option in Regulations section 1.410(b)-8(a)(4), enter the year for which the coverage data is submitted.

Line 11d. Include all employees of all entities combined under sections 414(b), (c), (m), or (o). Also include all self-employed individuals, common law employees, and leased employees as defined in section 414(n) of any of the entities above, other than those excluded by section 414(n)(5). Certain individuals may also be required to be counted as employees. See the definition of employee in Regulations section 1.410(b)-9. Also see Regulations section 1.410(b)-6(i), which may permit the employer to exclude certain former nonhighly compensated employees.

Note.

This note applies only to plans that include a qualified cash or deferred arrangement under section 401(k) or employee or matching contributions under section 401(m). If there are any contributions under the plan that are not subject to the special rule for section 401(k) plans and section 401(m) plans in Regulations section 1.401(a)(4)-1(b)(2)(ii)(B) (such as nonelective contributions), complete lines 11e through 11k with respect to the portion of the plan that includes these contributions and enter the ratio percentage for this portion of the plan on line 11l. Otherwise, complete lines 11e through 11k with respect to the section 401(k) part of the plan (or the section 401(m) plan if there is no section 401(k) arrangement) and leave line 11l blank. In all cases, enter the ratio percentages for the section 401(k) and the section 401(m) parts of the plan, as applicable, on line 11m. These percentages should be based on the actual nonexcludables in the 401(k) and 401(m) portions, respectively. It is suggested that these calculations be submitted with the application but this is optional.

If the plan provides for nonelective profit-sharing contributions, do not base the calculations on lines 11m(1) and (2) on the nonexcludable employees reported on line 11g unless all of the disaggregated plans (profit-sharing, 401(k), and 401(m)) have the same nonexcludable employees with the same age and service requirements.

Line 11e(1). Enter the number of employees who are excluded because they have not attained the lowest minimum age and service requirements for any employee under this plan. If the employer is separately testing the portion of a plan that benefits otherwise excludable employees, attach a separate schedule describing which employees are treated as excludable employees on account of the minimum age and service requirements under each separate portion of the plan.

Line 11e(2). Enter the number of employees who are excluded because they are collectively bargained employees as defined in Regulations section 1.410(b)-6(d)(2), regardless of whether those employees benefit under the plan. For this purpose, an employee covered under a CBA is not considered a collectively bargained employee if more than 2% of the employees who are covered under the agreement are professional employees as defined in Regulations section 1.410(b)-9.

Line 11e(3). Enter the number of employees who do not receive an allocation or accrue a benefit under the plan only because they do not satisfy a minimum hours of service requirement or a last day of the plan year requirement, provided they do not have more than 500 hours of service, and they are not employed on the last day of the plan year. Do not enter on this line any employees who have more than 500 hours of service, even if they are not employed on the last day of the plan year.

Line 11e(4). If this plan benefits the employees of one QSLOB, enter on this line the number of employees of the employer's other QSLOBs. This is not applicable if the plan is tested under the special rule for employer-wide plans in Regulations section 1.414(r)-1(c)(2)(ii).

Line 11e(5). Enter the number of employees who are nonresident aliens who receive no earned income (as defined in section 911(d)(2)) from the employer that constitutes income from sources within the United States (as defined in section 861(a)(3)).

Line 11g. Subtract the total of lines 11e(1) through 11e(5) as reported on line 11f from the total employees reported on line 11d. The result is the number of "nonexcludable employees." These are the employees who can not be excluded from the plan for statutory or regulatory reasons and must be considered in the calculation of the ratio percentage even though they might not "benefit" under the plan. If they meet the age and service requirements of section 410 and are not otherwise excludable employees, they must be included in this number.

Line 11h. Enter the number of employees on line 11g who are highly compensated employees (HCEs) as defined in section 414(q).

Line 11i. In general, an employee is treated as benefiting under the plan for coverage tests purposes only if the employee receives an allocation of contributions or forfeitures or accrues a benefit under the plan for the plan year. Certain other employees are treated as benefiting if they fail to receive an allocation of contributions and/or forfeitures, or to accrue a benefit, solely because they are subject to plan provisions that uniformly limit plan benefits, such as a provision for maximum years of service, maximum retirement benefits, application of offsets or fresh start wear-away formulas, or limits designed to satisfy section 415. An employee is treated as benefiting under a plan to which elective contributions under section 401(k) or employee contributions and matching contributions under section 401(m) may be made if the employee is currently eligible to make such elective or employee contributions, or to receive a matching contribution, whether or not the employee actually makes or receives such contributions, (Regulations section 1.401(k)-1(g)(4) and 1.401(m)-1(f)(4)). However, do not apply this rule to determine if an employee is to be counted as benefiting for lines 11i and 11k if, in accordance with the Note following the instruction for line 11d, the information provided in lines 11e through 11k relates to the portion of the plan that is not subject to the rule in Regulations section 1.401(a)(4)-1(b)(2)(ii)(B).

Line 11k. See the instructions for line 11i for the meaning of "benefiting under the plan."

Line 11l. To obtain the ratio percentage:

Step 1. Divide the number on line 11k (nonexcludable NHCEs benefiting under the plan) by the number on line 11j (nonexcludable NHCEs).

Step 2. Divide the number on line 11i (nonexcludable HCEs benefiting under the plan) by the number on line 11h nonexcludable HCEs).

Step 3. Divide the result from Step 1 by the result from Step 2.

Note.

If the ratio percentage entered on line 11l and/or line 11m is less than 70%, the plan does not satisfy the ratio percentage test. In this case, the plan must satisfy the average benefit test. A determination regarding the average benefit test can be requested using Schedule Q.

Line 11m. See the Note following the instructions for line 11d. To determine the ratio percentages for the section 401(k) and all section 401(m) (matching and employee contribution) portions of the plan, follow the steps described in the instructions for lines 11d through 11l, but treat an employee as benefiting under the rules for section 401(k) plans and section 401(m) plans described in the instruction for line 11i.

Design-Based Nondiscrimination Safe Harbors

Line 12. This question may be used by certain plans to request an optional determination regarding the design-based safe harbor under section 401(a)(4).

If this is a section 401(k) and/or section 401(m) plan that does not contain a provision for nonelective employer contributions, this option should be marked “No.”

If any disaggregated plan relies on a non-design based safe harbor or a general test this option must be marked "No." The Schedule Q may be used to request a determination regarding a non-design based safe harbor or a general test.

If this plan has been restructured into component plans, this option must be marked “No.” The Schedule Q may be used to request a determination regarding how each restructured component plan satisfies the nondiscrimination in amount requirement of Regulations section 1.401(a)(4)-1(b)(2).

If “Yes” is checked, or if “No” is checked but a request for a determination regarding a non-design based safe harbor or a general test is made on Schedule Q, the determination letter for the plan will also be a determination regarding the section 401(a)(4) requirement that a plan not discriminate in the amounts of contributions or benefits.

If “No” is checked, and a request for a determination regarding a non-design based safe harbor or a general test is not made on Schedule Q, the determination letter for the plan will not be a determination regarding this requirement, unless the plan is a section 401(k) and/or section 401(m) plan only.

Line 12a. Check "Yes" if the plan is intended to satisfy the permitted disparity requirements of section 401(I).

Line 12b. To satisfy section 401(l), a plan must provide that the overall permitted disparity limits are not exceeded and specify how employer-provided contributions or benefits under the plan are adjusted, if necessary, to satisfy the overall permitted disparity limits. See Regulations section 1.401(l)-5.

Line 12c. This line provides a list of the design-based nondiscrimination safe-harbor regulations.

Specific Instructions