Internal Revenue Bulletins  
Revenue Procedure 2005-65 September 19, 2005

General Rules and Specifications for
Substitute Forms W-2 and W-3

Section 1. Purpose

.01 The purpose of this revenue procedure is to provide general rules and specifications from the Internal Revenue Service (IRS) and the Social Security Administration (SSA) for paper substitute forms for Form W-2, Wage and Tax Statement, and Form W-3, Transmittal of Wage and Tax Statements, for wages paid during the 2005 calendar year.

.02 For purposes of this revenue procedure, substitute Form W-2 (Copy A) and substitute Form W-3 are forms that are not printed by the IRS. Copy A or any other copies of a substitute Form W-2 or a substitute Form W-3 must conform to the specifications in this revenue procedure to be acceptable to the IRS and the SSA. No IRS office is authorized to allow deviations from this revenue procedure. Preparers should also refer to the separate 2005 Instructions for Forms W-2 and W-3 for details on how to complete these forms. See Part C, Section 4, for information on obtaining the official IRS forms and instructions. See Part B, Section 2, for requirements for the copies of substitute forms furnished to employees.

.03 For purposes of this revenue procedure, the official, IRS-printed red dropout ink Forms W-2 (Copy A) and W-3 and their exact substitutes are referred to as �red-ink.� The SSA-approved, laser-printed, black-and-white Forms W-2 (Copy A) and W-3 are referred to as �laser-printed.�

Any questions about the red-ink Form W-2 (Copy A) and Form W-3 should be emailed to *[email protected] or sent to:

Internal Revenue Service Attn: Substitute Forms Program SE:W:CAR:MP:T:T:SP, IR 6406 1111 Constitution Ave., NW Washington, DC 20224

Any questions about the black-and-white laser-printed Form W-2 (Copy A) and Form W-3 should be emailed to [email protected] or sent to:

Social Security Administration Data Operations Center Attn: Laser Forms Approval, Room 359 1150 E. Mountain Drive Wilkes-Barre, PA 18702-7997

Also, see Sections 3.05 and 3.06 of Part A.

Note

Note. You should receive a response within 30 days from either the IRS or the SSA.

.04 The IRS maintains a centralized call site at its Enterprise Computing Center � Martinsburg (ECC) to answer questions related to information returns (Forms W-2, W-3, 1099 series, 1096, etc.). You can reach the call site at 304-263-8700 (not a toll-free number) or 1-866-455-7438 (toll-free). The Telecommunication Device for the Deaf (TDD) number is 304-267-3367 (not a toll-free number). The hours of operation are Monday through Friday from 8:30 a.m. to 4:30 p.m. Eastern time. You may also send questions to the call site via the Internet at [email protected]. IRS/ECC does not process Forms W-2 (Copy A). Forms W-2 (Copy A) prepared on paper and/or electronically must be filed with the SSA. IRS/ECC does, however, process waiver requests (Form 8508, Request for Waiver From Filing Information Returns Electronically/Magnetically) and extension of time to file requests (Form 8809, Application for Extension of Time To File Information Returns) for Forms W-2 (Copy A) and requests for an extension of time to furnish the employee copies of Form W-2. See Publication 1220, Specifications for Filing Forms 1098, 1099, 5498 and W-2G Electronically or Magnetically, for information on waivers and extensions of time.

.05 The following publications provide detailed filing procedures for certain information returns:

  • 2005 Instructions for Forms W-2 and W-3,

  • Instructions for Forms W-2c and W-3c (Rev. December 2002), and

  • Publication 1223, General Rules and Specifications for Substitute Forms W-2c and W-3c.

Section 2. What�s New

.01 Magnetic media is being eliminated as a filing method. The last year for filing Forms W-2 on tapes and cartridges was tax year 2004 (forms timely filed with the SSA in 2005). The last year for filing Forms W-2 on 31/2 inch diskette is tax year 2005 (forms timely filed with the SSA in 2006). Diskettes will no longer be accepted after February 28, 2006.

.02 For timeliness, to save printing expenses, and because users of Publication 1141 have access to the Internet and the IRS website, Publication 1141 will now only be released for downloading from the IRS website. However, this revenue procedure will continue to be released as hard copy in the Internal Revenue Bulletin.

.03 The Martinsburg Computing Center�s name was changed to the Enterprise Computing Center � Martinsburg (ECC).

.04 Payee statements (Copies B, C, and 2 of Form W-2) may be furnished electronically, if employees give their consent (as described in Treasury Regulations Section 31.6501-1(j)). See also Publication 15-A, Employer's Supplemental Tax Guide.

.05 We added three new codes (Q, Y, and Z) for use in box 12 of Form W-2. See the 2005 Instructions for Forms W-2 and W-3 for details.

.06 Form W-3PR is 7.0 inches wide and should be printed on 8.5 by 11-inch paper using a .5-inch top margin with .75- inch left and right margins.

.07 Editorial changes were made. Redundancies were eliminated as much as possible.

Section 3. General Rules for Paper Forms W-2 and W-3

.01 Employers not filing electronically or on diskette must file paper Forms W-2 (Copy A) along with Form W-3 with the SSA by using either the official IRS form or a substitute form that exactly meets the specifications shown in Parts B and C of this revenue procedure.

Note

Note. Substitute territorial forms (W-2AS, W-2GU, W-2VI) should also conform to the specifications as outlined in this revenue procedure. These forms require the form designation (�W-2AS,� �W-2GU,� �W-2VI�) on Copy A to be in black ink.

Employers who file with the SSA electronically, on diskette, or on paper may design their own statements to furnish to employees. These employee statements designed by employers must comply with the requirements shown in Parts B and C.

.02 Red-ink substitute forms that completely conform to the specifications contained in this revenue procedure may be privately printed without prior approval from the IRS or the SSA. Only the black-and-white laser-printed forms need to be submitted to the SSA for approval (see Section 1B of Part B).

.03 As in the past, Form W-2 (Copy A) and Form W-3 may be generated using a laser-printer by following all guidelines and specifications (also see Section 1B of Part B). In general, regardless of the method of entering data, using black ink on Forms W-2 and W-3 provides better readability for processing by scanning equipment. Colors other than black are not easily read by the scanner and may result in delays or errors in the processing of Forms W-2 (Copy A) and W-3. The printing of the data should be centered within the boxes. The size of the variable data must be printed in a font no smaller than 10-point.

Note

Note. With the exception of the identifying number and the corner register marks, the preprinted form layout for the red-ink Forms W-2 (Copy A) and W-3, must be in Flint J-6983 red OCR dropout ink or an exact match. (See Section 1A.03 of Part B.)

.04 Substitute forms filed with the SSA and substitute copies furnished to employees that do not conform to these specifications are unacceptable. Forms W-2 (Copy A) and W-3 filed with the SSA that do not conform may be returned. In addition, penalties may be assessed for not complying with the form specifications.

.05 If you are uncertain of any specification and want it clarified:

  1. Submit a letter or email citing the specification to the appropriate address in section 3.06.

  2. State your interpretation of that specification.

  3. Enclose an example (if appropriate) of how the form would appear if produced using your understanding of the specification.

  4. Be sure to include your name, complete address, phone number, and if applicable, your email address with your correspondence.

.06 Any questions about the specifications, especially those for the red-ink Form W-2 (Copy A) and Form W-3, should be emailed to *[email protected] or sent to:

Internal Revenue Service Attn: Substitute Forms Program SE:W:CAR:MP:T:T:SP, IR 6406 1111 Constitution Ave., NW Washington, DC 20224

Any questions about the black-and-white laser-printed Form W-2 (Copy A) and Form W-3 should be emailed to [email protected] or sent to:

Social Security Administration Data Operations Center Attn: Laser Forms Approval, Room 359 1150 E. Mountain Drive Wilkes-Barre, PA 18702-7997

Note

Note. You should receive a response within 30 days from either the IRS or the SSA.

.07 Forms W-2 and W-3 are subject to annual review and possible change. Therefore, employers are cautioned against overstocking supplies of privately-printed substitutes.

.08 Separate instructions for Forms W-2 and W-3 are provided in the 2005 Instructions for Forms W-2 and W-3. Form W-3 should be used only to transmit paper Forms W-2 (Copy A). Form W-3 is a single sheet including only essential filing information. Be sure to make a copy of your completed Form W-3 for your records. Copies of the current year official IRS Forms W-2 and W-3, and the instructions for those forms, may be obtained from most IRS offices or by calling 1-800-829-3676. The IRS provides only cutsheet sets of Forms W-2 and cutsheets of Form W-3. The instructions and information copies of the forms may also be found on the IRS website at www.irs.gov .

.09 Because substitute Forms W-2 (Copy A) and W-3 are machine-imaged and scanned by the SSA, the forms must meet the same specifications as the official IRS Forms W-2 and W-3 (as shown in the exhibits).

Section 4. General Rules for Filing Forms W-2 (Copy A) Electronically or On Magnetic Diskette

.01 Employers must file Forms W-2 (Copy A) with the SSA electronically or on magnetic diskette if they file 250 or more calendar year 2005 Forms W-2 (Copy A). The SSA publication MMREF-1, Magnetic Media Reporting and Electronic Filing, contains specifications and procedures for filing Form W-2 information with the SSA magnetically or electronically. Employers are cautioned to obtain the most recent revision of MMREF-1 (and supplements) due to any subsequent changes in specifications and procedures.

.02 You may obtain a copy of the MMREF-1 by:

  • Accessing the SSA website at www.socialsecurity.gov/employer/pub.htm,

  • Writing to:

    Social Security Administration OCO, DES; Attn: Employer Reporting Services Center 300 North Greene Street Baltimore, MD 21290-0300

  • Calling your local SSA Employer Services Liaison Officer (ESLO) (the ESLOs' phone numbers are available at www.socialsecurity.gov/employer/empcontacts.htm), or

  • Calling the SSA's Employer Reporting Assistance staff at 1-800-772-6270.

.03 Magnetic diskette or electronic filers do not file a paper Form W-3. See the SSA publication MMREF-1 for guidance on transmitting Form W-2 (Copy A) information to SSA electronically.

.04 Employers who do not comply with the magnetic media or electronic filing requirements for Form W-2 (Copy A) and who are not granted a waiver by the IRS may be subject to penalties. Employers who file Form W-2 information with the SSA electronically or on magnetic diskette must not send the same data to the SSA on paper Forms W-2 (Copy A). Any duplicate reporting may subject filers to unnecessary contacts by the SSA or the IRS.

Part B. Specifications for Substitute Forms W-2 and W-3

Section 1A. Specifications for Red-Ink Substitute Form W-2 (Copy A) and Form W-3 Filed with the SSA

.01 The official IRS-printed red dropout ink Form W-2 (Copy A) and W-3 and their exact substitutes are referred to as red-ink in this revenue procedure. Employers may file substitute Forms W-2 (Copy A) and W-3 with the SSA. The substitute forms must be exact replicas of the official IRS forms with respect to layout and content because they will be read by scanner equipment.

.02 Paper used for cutsheets and continuous-pinfed forms for substitute Form W-2 (Copy A) and Form W-3 that are to be filed with the SSA must be white 100% bleached chemical wood, 18-20 pound paper only, optical character recognition (OCR) bond produced in accordance with the following specifications:

  Acidity: Ph value, average, not less than 4.5
  Basis weight: 17 x 22 inch 500 cut sheets, pound 18-20
  Metric equivalent�gm./sq. meter  
    (a tolerance of +5 pct. is allowed) 68-75
  Stiffness: Average, each direction, not less than�milligrams  
    Cross direction 50
    Machine direction 80
  Tearing strength: Average, each direction, not less than�grams 40
  Opacity: Average, not less than�percent 82
  Reflectivity: Average, not less than�percent 68
  Thickness: Average�inch 0.0038
    Metric equivalent�mm 0.097
    (a tolerance of +0.0005 inch (0.0127 mm) is allowed) Paper cannot vary more than 0.0004 inch (0.0102 mm) from one edge to the other.  
  Porosity: Average, not less than�seconds 10
  Finish (smoothness): Average, each side�seconds 20-55
    (for information only) the Sheffield equivalent�units 170-d200
  Dirt: Average, each side, not to exceed�parts per million 8

Note

Note. Reclaimed fiber in any percentage is permitted, provided the requirements of this standard are met.

.03 All printing of substitute Forms W-2 (Copy A) and W-3 must be in Flint red OCR dropout ink except as specified below. The following must be printed in nonreflective black ink:

  • Identifying number �22222� or �33333� at the top of the forms.

  • Tax year at the bottom of the forms.

  • The four (4) corner register marks on the forms.

  • The jurat and �Signature, Title, Date� line at the bottom of Form W-3.

  • The form identification number (�W-3�) at the bottom of Form W-3.

  • All the instructions below Form W-3 beginning with �Send this entire page....� line to the bottom of Form W-3.

.04 The vertical and horizontal spacing for all federal payment and data boxes on Forms W-2 and W-3 must meet specifications. On Form W-3 and Form W-2 (Copy A), all the perimeter rules must be 1-point (0.014-inch), while all other rules must be one-half point (0.007-inch). Vertical rules must be parallel to the left edge of the form; horizontal rules parallel to the top edge.

.05 The official red-ink Form W-3 and Form W-2 (Copy A) are 7.5 inches wide. Employers filing Forms W-2 (Copy A) with the SSA on paper must also file a Form W-3. Form W-3 must be the same width (7.5 inches) as the Form W-2. One Form W-3 is printed on a standard-size, 8.5 x 11-inch page. Two official Forms W-2 (Copy A) are contained on a single 8.5 x 11-inch page (exclusive of any snap-stubs).

.06 The top, left, and right margins for the Form W-2 (Copy A) and Form W-3 are .5 inches (1/2 inch). All margins must be free of printing except for the words �DO NOT STAPLE OR FOLD� on red-ink Form W-3. The space between the two Forms W-2 (Copy A) is 1.33 inches.

.07 The identifying numbers are �22222� for Form W-2 (Copies A (and 1)) and �33333� for Form W-3. No printing should appear anywhere near the identifying numbers. For both Form W-2 (Copy A) and Form W-3, the combination width of box a (Control number) and the box containing the identifying number must be 2.5 inches.

Note

Note. The identifying number must be printed in nonreflective black ink in OCR-A font of 10 characters per inch.

.08 The depth of the individual scannable image on a page must be the same as that on the official IRS forms. The depth from the top line to the bottom line of an individual Form W-2 (Copy A) must be 4.17 inches and the depth from the top line to the bottom line of Form W-3 must be 4.67 inches. (See Exhibits A and B.)

.09 Continuous-pinfed Forms W-2 (Copy A) must be separated into 11-inch deep pages. The pinfed strips must be removed when Forms W-2 (Copy A) are filed with the SSA. The two Forms W-2 (Copy A) on the 11-inch page must not be separated (only the pages are to be separated (burst)). The words �Do Not Cut, Fold, or Staple Forms on This Page� must be printed twice between the two Forms W-2 (Copy A) in Flint red OCR dropout ink. Perforations are required on all other copies (Copies 1, B, C, 2, and D) to enable the separation of individual forms.

.10 Box 12 of Form W-2 (Copy A) contains four entry boxes - 12a, 12b, 12c, and 12d. Do not make more than one entry per box. Enter your first code in box 12a (for example, enter Code D in box 12a, not 12d, if it is your first entry). If more than four items need to be reported in box 12, use a second Form W-2 to report the additional items (see �Multiple forms� in the 2005 Instructions for Forms W-2 and W-3). Do not report the same federal tax data to the SSA on more than one Form W-2 (Copy A). However, repeat the identifying information (employee's name, address, and SSN; employer's name, address, and EIN) on each additional form.

.11 The checkboxes in box 13 of Form W-2 (Copy A) must be .14 inches each; the space before the first checkbox is .20 inches; the spacing on each remaining side of the 3 checkboxes is .36 inches (see Exhibit A). The checkboxes in box b of Form W-3 must also be .14 inches (see Exhibit B for other dimensions in box b).

Note

Note. More than 50% of an applicable checkbox must be covered by an �X.�

.12 All substitute Forms W-2 (Copy A) and W-3 in the red-ink format must have the tax year, form number, and form title printed on the bottom face of each form using type identical to that of the official IRS form. The red-ink substitute Form W-2 (Copy A) and Form W-3 must have the form producer's EIN entered directly to the left of �Department of the Treasury,� in red.

.13 The words �For Privacy Act and Paperwork Reduction Act Notice, see back of Copy D.� must be printed in Flint red OCR dropout ink in the same location as on the official Form W-2 (Copy A). The words �For Privacy Act and Paperwork Reduction Act Notice, see back of Copy D of Form W-2.� must be printed at the bottom of the page of Form W-3 in black ink.

.14 The Office of Management and Budget (OMB) Number must be printed on substitute Forms W-3 and W-2 (on each ply) in the same location as on the official IRS forms.

.15 All substitute Forms W-3 must include the instructions that are printed on the same sheet below the official IRS form.

.16 The back of substitute Form W-2 (Copy A) and Form W-3 must be free of all printing.

.17 All copies must be clearly legible. Hot wax and cold carbon spots are not permitted for Form W-2 (Copy A). Interleaved carbon should be black and must be of good quality to assure legibility on all copies and to avoid smudging. Fading must be minimized to assure legibility.

.18 Chemical transfer paper is permitted for Form W-2 (Copy A) only if the following standards are met:

  • Only chemically-backed paper is acceptable for Form W-2 (Copy A). Front and back chemically-treated paper cannot be processed properly by scanning equipment.

  • Chemically-transferred images must be black.

  • Carbon-coated forms are not permitted.

.19 The Government Printing Office (GPO) symbol and the Catalog Number (Cat. No.) must be deleted from substitute Form W-2 (Copy A) and Form W-3.

Section 1B. Specifications for Laser-Printed Substitute Form W-2 (Copy A) and Form W-3 Filed with the SSA

.01 The SSA-approved, laser-printed, black-and-white Forms W-2 (Copy A) and W-3 are referred to as laser-printed. Specifications for the laser-printed black-and-white Forms W-2 (Copy A) and W-3 are similar to the red-ink forms (Part B, Section 1A) except for the items that follow (see Exhibits E and F). Exhibits are samples only and must not be downloaded to meet tax obligations.

  1. Forms must be printed on 8.5 x 11-inch single-sheet paper only, not on continuous-feed using a laser printer. There must be two Forms W-2 (Copy A) printed on a page. There must be no horizontal perforations between the two Forms W-2 (Copy A) on each page.

  2. All forms and data must be printed in nonreflective black ink only.

  3. The data and forms must be programmed to print simultaneously. Forms cannot be produced separately from wage data entries.

  4. The forms must not contain corner register marks.

  5. The forms must not contain any shaded areas including those boxes that are entirely shaded on the red-ink forms.

  6. Identifying numbers on both Form W-2 (�22222�) and Form W-3 (�33333�) must be preprinted in 14-point Arial bold font or a close approximation.

  7. The form numbers (�W-2� and �W-3�) must be in 18-point Arial font or a close approximation. The tax year (�2005�) on Forms W-2 (Copy A) and W-3 must be in 20-point Arial font or a close approximation.

  8. No part of the box titles or the data printed on the forms may touch any of the vertical or horizontal lines, nor should any of the data intermingle with the box titles. The data should be centered in the boxes.

  9. Do not print any information in the margins of the laser-printed forms (for example, do not print �DO NOT STAPLE OR FOLD� in the top margin of Form W-3).

  10. The word �Code� must not appear in box 12 on Form W-2 (Copy A).

  11. A 4-digit vendor code preceded by four zeros and a slash (for example, 0000/1234) must appear in 12-point Arial font, or a close approximation, under the tax year in place of the Cat. No. on Form W-2 (Copy A) and in the bottom right corner of the �For Official Use Only� box at the bottom of Form W-3. Do not display the form producer's EIN to the left of �Department of the Treasury.� The vendor code will be used to identify the form producer.

  12. Do not print Catalog Numbers (Cat. No.) on either form (10134D for Form W-2 (Copy A); 10159Y for Form W-3).

  13. Do not print the checkboxes in:

    • Box (b) of Form W-3. The �X� should be programmed to be printed and centered directly below the applicable �Kind of Payer.�

    • The �Void� box of Form W-2 (Copy A). The �X� should be programmed to be printed to the right of �Void� because of space limitations.

    • Box 13 of Form W-2 (Copy A). The �X� should be programmed to be printed and centered directly below the applicable box title.

  14. Do not print dollar signs. If there are no money amounts being reported, the entire field should be left blank.

  15. The space between the two Forms W-2 (Copy A) is 1.33 inches.

.02 You must submit samples of your laser-printed substitute forms to the SSA. Only laser-printed, black-and-white substitute Forms W-2 (Copy A) and W-3 for tax year 2005 will be accepted for approval by the SSA. Questions regarding other forms (that is, red-ink Forms W-2c, W-3c, 1099 series, 1096, etc.) must be directed to the IRS.

.03 You will be required to send one set of blank and one set of dummy-data, laser-printed substitute Forms W-2 (Copy A) and W-3 for approval. Sample data entries should be filled in to the maximum length for each box entry, preferably using numeric data or alpha data, depending upon the type required to be entered. Include in your submission the name, telephone number, fax number, and email address of a contact person who can answer questions regarding your sample forms.

.04 To receive approval, you may first contact the SSA at [email protected] to obtain a template and further instructions in PDF or Excel format. You may also send your 2005 sample, laser-printed substitute forms to:

Social Security Administration Data Operations Center Attn: Laser Forms Approval, Room 359 1150 E. Mountain Drive Wilkes-Barre, PA 18702-7997

Send your sample forms via private mail carrier or certified mail in order to verify their receipt. You can expect approval (or disapproval) by the SSA within 30 days of receipt of your sample forms.

.05 The 4-digit vendor code preceded by four zeros and a slash (0000/) must be preprinted on the sample, laser-printed substitute forms. Forms not containing a vendor code will be rejected and will not be submitted for testing or approval. If you do not have a vendor code, you may contact the National Association of Computerized Tax Processors via email at [email protected].

.06 If you use forms produced by a vendor and have questions concerning approval, do not send the forms to the SSA for approval. Instead, you may contact the software vendor to obtain a copy of SSA's dated approval notice supplied to that vendor.

Section 2. Requirements for Substitute Forms Furnished to Employees (Copies B, C, and 2 of Form W-2)

Note

Note. Printers are cautioned that the rules in Part B, Section 2, apply only to employee copies of Form W-2 (Copies B, C, and 2). Paper filers who send Forms W-2 (Copy A) to the SSA must follow the requirements in Part B, Sections 1A and/or 1B.

.01 All employers (including those who file on magnetic diskette or electronically) must furnish employees with at least two copies of Form W-2 (three or more for employees required to file a state, city, or local income tax return). The following rules are guidelines for preparing employee copies.

The dimensions of these copies (Copies B, C, and 2), but not Copy A, may differ from the dimensions of the official IRS form to allow space for reporting additional information, including additional entries such as withholding for health insurance, union dues, bonds, or charity in box 14. The limitation of a maximum of four items in box 12 of Form W-2 applies only to Copy A, which is filed with the SSA.

Note

Note. Payee statements (Copies B, C, and 2 of Form W-2) may now be furnished electronically, if employees give their consent (as described in Treasury Regulations Section 31.6501-1(j)). See also Publication 15-A, Employer's Supplemental Tax Guide.

.02 The minimum dimensions for employee copies only (not Copy A) of Form W-2 should be 2.67 inches deep by 4.25 inches wide. The maximum dimensions should be no more than 6.5 inches deep by no more than 8.5 inches wide.

Note

Note. The maximum and minimum size specifications are for tax year 2005 only and may change in future years.

.03 Either horizontal or vertical format is permitted (see Exhibit D).

.04 The paper for all copies must be white and printed in black ink. The substitute Copy B, which employees are instructed to attach to their federal income tax returns, should be at least 9-pound paper (basis 17 x 22-500). Other copies furnished to employees should also be at least 9-pound paper (basis 17 x 22-500).

.05 Employee copies of Form W-2 (Copies B, C, and 2), including those that are printed on a single sheet of paper, must be easily separated. Providing perforations between the individual copies satisfies this requirement, but using scissors to separate Copies B, C, and 2 does not.

Note

Note. The perforation requirement in this section does not apply to printouts of copies of Forms W-2 that are furnished electronically to employees (as described in Treasury Regulations Section 31.6051-1(j)). However, these employees should be cautioned to carefully separate the copies of Form W-2. See Publication 15-A, Employer's Supplemental Tax Guide, for information on electronically furnishing Forms W-2 to employees.

.06 Interleaved carbon and chemical transfer paper employee copies must be clearly legible. Hot wax and cold-carbon spots are not permitted for employee copies. All copies must be able to be photocopied. Interleaved carbon should be black and must be of good quality to assure legibility on all copies and to avoid smudging. Fading must be minimized to assure legibility.

.07 The electronic tax logo on the IRS official employee copies is not required on any of the substitute form copies. To avoid confusion and questions by employees, employers are encouraged to delete the identifying number (�22222�) and the word �Void� and its associated checkbox from the employee copies of Form W-2.

.08 All substitute employee copies must contain boxes, box numbers, and box titles that match the official IRS Form W-2. Boxes that do not apply can be deleted. However, certain core boxes must be included. The placement, numbering, and size of this information is specified as follows:

  • The items and box numbers that constitute the core data are:

    • Box 1 � Wages, tips, other compensation,

    • Box 2 � Federal income tax withheld,

    • Box 3 � Social security wages,

    • Box 4 � Social security tax withheld,

    • Box 5 � Medicare wages and tips, and

    • Box 6 � Medicare tax withheld.

    The core boxes must be printed in the exact order shown on the official IRS form.

  • The core data boxes (1 through 6) must be placed in the upper right of the form. Substitute vertical-format copies may have the core data across the top of the form (see Exhibit D). In no instance, will boxes or other information be permitted to the right of the core data.

  • The form title, number, or copy designation (B, C, or 2) may be at the top of the form. Also, a reversed or blocked-out area to accommodate a postal permit number or other postal considerations is allowed in the upper-right.

  • Boxes 1 through 6 must each be a minimum of 11/8 inches wide x 1/4 inch deep.

  • Other required boxes are:

    • b) Employer identification number (EIN),

    • c) Employer's name, address, and ZIP code,

    • d) Employee's social security number,

    • e) Employee's name, and

    • f) Employee's address and ZIP code.

Identifying items must be present on the form and be in boxes similar to those on the official IRS form. However, they may be placed in any location other than the top or upper right. You do not need to use the lettering system (b-f) used on the official IRS form. The employer identification number (EIN) may be included with the employer's name and address and not in a separate box.

Note

Note. Box a (�Control number�) is not required.

.09 All copies of Form W-2 furnished to employees must clearly show the form number, the form title, and the tax year prominently displayed together in one area of the form. The title of Form W-2 is �Wage and Tax Statement.� It is recommended (but not required) that this be located on the bottom left of substitute Forms W-2. The reference to the �Department of the Treasury � Internal Revenue Service� must be on all copies of substitute Forms W-2 furnished to employees. It is recommended (but not required) that this be located on the bottom right of Form W-2.

.10 If the substitute employee copies are labeled, the forms must contain the applicable description:

  • �Copy B, To Be Filed With Employee�s FEDERAL Tax Return.�

  • �Copy C, For EMPLOYEE'S RECORDS.�

  • �Copy 2, To Be Filed With Employee�s State, City, or Local Income Tax Return.�

It is recommended (but not required) that these be located on the lower left of Form W-2. If the substitute employee copies are not labeled as to the disposition of the copies, then written notification using similar wording must be provided to each employee.

.11 The tax year (2005) must be clearly printed on all copies of substitute Form W-2. It is recommended (but not required) that this information be in the middle at the bottom of the Form W-2. The use of 24-pt. OCR-A font is recommended (but not required).

.12 Boxes 1, 2, and 9 (if applicable) on Copy B must be outlined in bold 2-point rule or highlighted in some manner to distinguish them. If �Allocated tips� are being reported, it is recommended (but not required) that box 8 also be outlined. If reported, �Social security tips� (box 7) must be shown separately from �Social security wages� (box 3).

Note

Note. Boxes 8 and 9 may be omitted if not applicable.

.13 If employers are required to withhold and report state or local income tax, the applicable boxes are also considered core information and must be placed at the bottom of the form. State information is included in:

  • Box 15 (State, Employer's state ID number)

  • Box 16 (State wages, tips, etc.)

  • Box 17 (State income tax)

Local information is included in:

  • Box 18 (Local wages, tips, etc.)

  • Box 19 (Local income tax)

  • Box 20 (Locality name)

.14 Boxes 7 through 14 may be omitted from substitute employee copies unless the employer must report any of that information to the employee. For example, if an employee did not have �Social security tips� (box 7), the form could be printed without that box. But if an employer provided dependent care benefits, the amount must be reported separately, shown in box 10, and labeled �Dependent care benefits.�

.15 Employers may enter more than four codes in box 12 of substitute Copies B, C, and 2 (and 1 and D) of Form W-2, but each entry must use Codes A-Z (see the 2005 Instructions for Forms W-2 and W-3).

.16 If an employer has employees in any of the three categories in box 13, all checkbox headings must be shown and the proper checkmark made, when applicable.

.17 Employers may use box 14 for any other information that they wish to give to their employees. Each item must be labeled. (See the instructions for box 14 in the 2005 Instructions for Forms W-2 and W-3.)

.18 The front of Copy C of a substitute Form W-2 must contain the note �This information is being furnished to the Internal Revenue Service. If you are required to file a tax return, a negligence penalty or other sanction may be imposed on you if this income is taxable and you fail to report it.�

.19 Instructions similar to those contained on the back of Copies B and C of the official IRS Form W-2 must be provided to each employee. An employer may modify or delete instructions that do not apply to its employees. (For example, remove Railroad Retirement Tier 1 and Tier 2 compensation information for nonrailroad employees or information about dependent care benefits that the employer does not provide.)

.20 Employers must notify their employees who have no income tax withheld that they may be able to claim a tax refund because of the earned income credit (EIC). They will meet this notification requirement if they furnish a substitute Form W-2 with the EIC notice on the back of Copy B, IRS Notice 797, Possible Federal Tax Refund Due to the Earned Income Credit (EIC), or on their own statement containing the same wording. They may also change the font on Copy C so that the EIC notification and Form W-2 instructions fit entirely on the back. For more information about notification requirements, see Notice 1015, Have You Told Your Employees About the Earned Income Credit (EIC)?

Part C. Additional Instructions

Section 1. Additional Instructions for Form Printers

.01 If magnetic diskette or electronic media is not used for filing with the SSA, the substitute copies of Forms W-2 (either red-ink or laser-printed) should be assembled in the same order as the official IRS Forms W-2. Copy A should be first, followed sequentially by perforated sets (Copies 1, B, C, 2, and D).

.02 The substitute form to be filed by the employer with the SSA must carry the designation �Copy A.�

Note

Note. Magnetic diskette/electronic filers do not submit either red-ink or laser-printed paper Form W-2 (Copy A) or Form W-3 to the SSA.

.03 Substitute forms (red-ink or laser-printed) do not require a copy to be retained by employers (Copy D of Form W-2). However, employers must be prepared to verify or duplicate the information if it is requested by the IRS or the SSA. Paper filers who do not keep a Form W-2 (Copy D) should be able to generate a facsimile of Form W-2 (Copy A) in case of loss.

.04 Except for copies in the official assembly, no additional copies that may be prepared by employers should be placed ahead of Form W-2 (Copy C) �For EMPLOYEE'S RECORDS.�

.05 Instructions similar to those contained on the back of Copies B and C of the official IRS Form W-2 must be provided to each employee. These instructions may be printed on the back of the substitute Copies B and C or may be provided to employees on a separate statement. Do not print these instructions on the back of Copy 1 or 2 that is to be filed with the employee's state, city, or local income tax return. Any Forms W-2 (Copy A) and W-3 that are filed with the SSA must have no printing on the reverse side. Instructions similar to those provided as part of the IRS official forms must be provided as part of any substitute Form W-2 (Copy A) or Form W-3.

Section 2. Instructions for Employers

.01 Only originals of Form W-2 (Copy A) and Form W-3 may be filed with the SSA. Carbon copies and photocopies are unacceptable.

.02 Employers should type or machine-print data entries on the non-laser-generated forms whenever possible. Ensure good quality by using a high-quality type face, inserting data in the middle of blocks that are well separated from other printing and guidelines, and taking any other measures that will guarantee clear, sharp images. Black ink must be used with no script type, inverted font, italics or dual-case alpha characters.

Note

Note. 12-point Courier font is preferred by the SSA.

.03 Form W-2 (Copy A) requires decimal entries for wage data. Dollar signs should not be printed with money amounts on the Forms W-2 (Copy A) and W-3.

.04 The employer must provide a machine-scannable Form W-2 (Copy A). The employer must also provide employee copies (Copies B, C, and 2) that are legible and able to be photocopied (by the employee). Do not print any data in the top margin of the payee copies of the forms.

.05 Any printing in box a (Control number) on Forms W-2 or W-3 may not touch any vertical or horizontal lines and should be centered in the box.

.06 The filer's employer identification number (EIN) must be entered in box b of Form W-2 and box e of Form W-3. The EIN entered on Form(s) W-2 (box b) and Form W-3 (box e) must be the same as on Forms 941, 943, CT-1, Schedule H (Form 1040), or any other corresponding forms filed with the IRS. Be sure to use EIN format (00-0000000) rather than SSN format (000-00-0000).

.07 The employer's name, address, and EIN may be preprinted.

.08 If available, employers should use the official IRS-preprinted Form W-3 that they received with Publication 393 or Publication 2184 when filing red-ink Forms W-2 (Copy A) with the SSA.

Section 3. OMB Requirements for Both Red-Ink and Laser-Printed Substitute Forms

.01 The Paperwork Reduction Act (the Act) of 1995 (Public Law 104-13) requires that:

  • The Office of Management and Budget (OMB) approves all IRS tax forms that are subject to the Act.

  • Each IRS form contains (in or near the upper right corner) the OMB approval number, if assigned. (The official OMB numbers may be found on the official IRS printed forms and are also shown on the forms in Exhibits A, B, C, E, and F.)

  • Each IRS form (or its instructions) states:

    1. Why the IRS needs the information,

    2. How it will be used, and

    3. Whether or not the information is required to be furnished to the IRS.

    This information must be provided to any users of official or substitute IRS forms or instructions.

  • Any substitute form or substitute statement to a recipient must show the OMB number as it appears on the official IRS form.

.02 The OMB requirements for substitute IRS Form W-2 (Copy A) and Form W-3 are:

  • The OMB number (1545-0008) must appear exactly as shown on the official IRS form.

  • For any copy of Form W-2 other than Copy A, the OMB number must use one of the following formats:

    1. OMB No. 1545-0008 (preferred) or

    2. OMB # 1545-0008 (acceptable).

.03 Any substitute Form W-2 (Copy A only) must state �For Privacy Act and Paperwork Reduction Act Notice, see back of Copy D.� Any substitute Form W-3 must state �For Privacy Act and Paperwork Reduction Act Notice, see back of Copy D of Form W-2.� If no instructions are provided to users of your forms, you must furnish them with the exact text of the Privacy Act and Paperwork Reduction Act Notice.

Section 4. Copies of Forms

.01 You can obtain official IRS forms and information copies of federal tax materials at local IRS offices or by calling the IRS Distribution Center at 1-800-829-3676. Other ways to get federal tax material include:

  • The Internet at www.irs.gov.

  • The IRS� CD-ROM (Publication 1796).

Only contact the IRS, not the SSA, for forms.

Note

Note. Many IRS forms are provided on the IRS website and on the Federal Tax Forms CD-ROM. But copies of Form W-2 (Copy A) and Form W-3 cannot be used for filing with the IRS or SSA when obtained by these methods because the forms do not meet the specific printing specifications as described in this publication. Copies of Forms W-2 and W-3 obtained from these sources are for information purposes only.

.02 You can access the IRS website at www.irs.gov.

.03 The IRS also offers an alternative to downloading electronic files and provides current and prior-year access to tax forms and instructions through its Federal Tax Forms CD-ROM. The CD will be available for the upcoming filing season. Order Publication 1796, IRS Federal Tax Products CD-ROM, by using the IRS website at www.irs.gov/cdorders or by calling 1-877-CDFORMS (1-877-233-6767).

Section 5. Effect on Other Documents

.01 Revenue Procedure 2004-54, 2004-34 I.R.B. 325, dated August 23, 2004 (reprinted as Publication 1141, Revised 8-2004), is superseded.

List of Exhibits

  • Exhibit A � Form W-2 (Copy A) (Red-Ink)

  • Exhibit B � Form W-3 (Red-Ink)

  • Exhibit C � Form W-2 (Copy B)

  • Exhibit D � Form W-2 (Alternative Employee Copies) (Illustrating Horizontal and Vertical Formats)

  • Exhibit E � Form W-2 (Copy A) (Laser-Printed)

  • Exhibit F � Form W-3 (Laser-Printed)

Exhibit A: Form W-2 (Copy A) (Red-Ink)This exhibit shows the dimensions of the IRS-official, red-ink version
of the 2005 Revision of Copy A of Form W-2 for purposes of substitute form
producers and software vendors.  The exhibit applies vertical and horizontal
rules to the official IRS over-the-counter paper version of the form to indicate
the size and location of various items on the form.

Exhibit B: Form W-3 (Red-Ink)This exhibit shows the dimensions of the IRS-official, red-ink version
of the 2005 Revision of Form W-3 for purposes of substitute form producers
and software vendors.  The exhibit applies vertical and horizontal rules to
the official IRS over-the-counter paper version of the form to indicate the
size and location of various items on the form.

Exhibit C: Form W-2 (Copy B)This exhibit shows the IRS-official version of the 2005 Revision of
Copy B of Form W-2 as an example for purposes of substitute form producers
and software vendors.

Exhibit D: Form W-2 Alternative Employee Copies (Illustrating Horizontal
and Vertical Formats)This exhibit shows examples of acceptable versions of employee copies
of the 2005 Revision of Form W-2 for purposes of substitute form producers
and software vendors.

Exhibit E: Form W-2 (Copy A) (Laser-Printed)This exhibit shows the dimensions of the laser-printed version of the
2005 Revision of Copy A of Form W-2 for purposes of substitute form producers
and software vendors.  The exhibit applies vertical and horizontal rules to
this version of the form to indicate the size and location of various items
on the form.

Exhibit F: Form W-3 (Laser-Printed)This exhibit shows the dimensions of the laser-printed version of the
2005 Revision of Form W-3 for purposes of substitute form producers and software
vendors.  The exhibit applies vertical and horizontal rules to this version
of the form to indicate the size and location of various items on the form.


Internal Revenue Bulletin 2005-38

SEARCH:

You can either: Search all IRS Bulletin Documents issued since January 1996, or Search the entire site. For a more focused search, put your search word(s) in quotes.





2005 Document Types | 2005 Weekly IRBs

IRS Bulletins Main | Home