.01 The purpose of this Revenue Procedure is to provide the specifications for filing Forms 1098, 1099, 5498, and W-2G with IRS electronically through the IRS FIRE System or magnetically, using IBM 3480, 3490, 3490E, 3590, or 3590E tape cartridges or 3¹/₂-inch diskettes. This Revenue Procedure must be used for the preparation of Tax Year 2005 information returns and information returns for tax years prior to 2005 filed beginning January 1, 2006, and postmarked by December 1, 2006. Specifications for filing the following forms are contained in this Revenue Procedure.

.02 All data received at IRS/ECC-MTB for processing will be given the same protection as individual income tax returns (Form 1040). IRS/ECC-MTB will process the data and determine if the records are formatted and coded according to this Revenue Procedure.

.03 Specifications for filing Forms W-2, Wage and Tax Statements, magnetically/electronically are only available from the Social Security Administration (SSA). Filers can call 1-800-SSA-6270 to obtain the telephone number of the SSA Employer Service Liaison Officer for their area.

.04 IRS/ECC-MTB does not process Forms W-2. Paper and/or magnetic media for Forms W-2 must be sent to SSA. IRS/ECC-MTB does, however, process waiver requests (Form 8508) and extension of time to file requests (Form 8809) for Forms W-2 as well as requests for an extension of time to provide the employee copies of Forms W-2.

.05 Generally, the box numbers on the paper forms correspond with the amount codes used to file electronically/magnetically; however, if discrepancies occur, the instructions in this Revenue Procedure govern.

.06 This Revenue Procedure also provides the requirements and specifications for electronic or magnetic media filing under the Combined Federal/State Filing Program.

.07 The following Revenue Procedures and publications provide more detailed filing procedures for certain information returns:

.08 This Revenue Procedure supersedes Rev. Proc. 2004-50 published as Publication 1220 (Rev. 9-2004), Specifications for Filing Forms 1098, 1099, 5498, and W-2G Electronically or Magnetically.

.01 In this publication, all pertinent changes for Tax Year 2005 are emphasized by the use of italics. Portions of text that require special attention are in boldface text. Filers are always encouraged to read the publication in its entirety.

.02 Programming Changes

a. General

b. Programming Changes — Transmitter “T” Record

c. Programming Changes — Payer “A” Record

d. Programming Changes — Payee “B” Record

.01 All information returns filed electronically or magnetically are processed at IRS/ECC-MTB. Files containing information returns and requests for IRS electronic and magnetic media filing information should be sent to the following address:

.02 All requests for an extension of time to file information returns with IRS/ECC-MTB or to the recipients, and requests for undue hardship waivers filed on Form 8508 should be sent to the following address:

.03 The telephone numbers for magnetic media inquiries or electronic submissions are:

.04 The 2005 General Instructions for Forms 1099, 1098, 5498, and W-2G has been included in the Publication 1220 for your convenience. Form 1096 is used only to transmit Copy A of paper Forms 1099, 1098, 5498, and W-2G. If filing paper returns, follow the mailing instructions on Form 1096 and submit the paper returns to the appropriate IRS Service Center.

.05 Make requests for paper Forms 1096, 1098, 1099, 5498, and W-2G, and publications related to electronic/magnetic filing by calling the IRS toll-free number 1-800-TAX-FORM (1-800-829-3676) or on the IRS website at www.irs.gov.

.06 Questions pertaining to magnetic media or internet filing of Forms W-2 must be directed to the Social Security Administration (SSA). Filers can call 1-800-772-6270 to obtain the phone number of the SSA Employer Service Liaison Officer for their area.

.07 Payers should not contact IRS/ECC-MTB if they have received a penalty notice and need additional information or are requesting an abatement of the penalty. A penalty notice contains an IRS representative’s name and/or telephone number for contact purposes; or, the payer may be instructed to respond in writing to the address provided. IRS/ECC-MTB does not issue penalty notices and does not have the authority to abate penalties. For penalty information, refer to the Penalties section of the 2005 General Instructions for Forms 1099, 1098, 5498, and W-2G.

.08 A taxpayer or authorized representative may request a copy of a tax return, including Form W-2 filed with a return, by submitting Form 4506, Request for Copy of Tax Return, to IRS. This form may be obtained by calling 1-800-TAX-FORM (1-800-829-3676). For any questions regarding this form, call 1-800-829-1040.

.09 The Information Reporting Program Customer Service Section (IRP/CSS), located at IRS/ECC-MTB, answers electronic/magnetic media, paper filing, and tax law questions from the payer community relating to the correct preparation and filing of business information returns (Forms 1096, 1098, 1099, 5498, 8027, and W-2G). IRP/CSS also answers questions relating to the electronic/magnetic media filing of Forms 1042-S and to the tax law criteria and paper filing instructions for Forms W-2 and W-3. Inquiries dealing with backup withholding and reasonable cause requirements due to missing and incorrect taxpayer identification numbers are also addressed by IRP/CSS. Assistance is available year-round to payers, transmitters, and employers nationwide, Monday through Friday, 8:30 a.m. to 4:30 p.m. Eastern time, by calling toll-free 1-866-455-7438 or via email at mccirp@irs.gov. Do not include SSNs or EINs on emails since this is not a secure line. The Telecommunications Device for the Deaf (TDD) toll number is 304-267-3367. Call as soon as questions arise to avoid the busy filing seasons at the end of January and February. Recipients of information returns (payees) should continue to contact 1-800-829-1040 with any questions on how to report the information returns data on their tax returns.

.10 IRP/CSS cannot advise filers where to send state copies of paper forms. Filers must contact the Tax Department in the state where the recipient resides to obtain the correct address.

.11 Form 4419, Application for Filing Information Returns Electronically/Magnetically, Form 8809, Application for Extension of Time to File Information Returns, and Form 8508, Request for Waiver From Filing Information Returns Magnetically, may be faxed to IRS/ECC-MTB at 304-264-5602. Form 4804, Transmittal of Information Returns Filed Magnetically, must always be included with media shipments.

.01 The regulations under section 6011(e)(2)(A) of the Internal Revenue Code provide that any person, including a corporation, partnership, individual, estate, and trust, who is required to file 250 or more information returns must file such returns electronically/magnetically. The 250* or more requirement applies separately for each type of return and separately to each type of corrected return.

*Even though filers may submit up to 249 information returns on paper, IRS encourages filers to transmit those information returns electronically or magnetically.

.02 All filing requirements that follow apply individually to each reporting entity as defined by its separate Taxpayer Identification Number (TIN), Social Security Number (SSN), Employer Identification Number (EIN), or Individual Taxpayer Identification Number (ITIN). For example, if a corporation with several branches or locations uses the same EIN, the corporation must aggregate the total volume of returns to be filed for that EIN and apply the filing requirements to each type of return accordingly.

.03 Payers who are required to submit their information returns on magnetic media may choose to submit their documents by electronic filing. Payers, who submit their information returns electronically by March 31, 2006, are considered to have satisfied the magnetic media filing requirements.

.04 IRS/ECC-MTB has one method for filing information returns electronically; see Part B.

.05 The following requirements apply separately to both originals and corrections filed electronically/magnetically:

.06 The above requirements do not apply if the payer establishes undue hardship (See Part E, Sec. 5).

.01 IRS/ECC-MTB prepares a list of vendors who support electronic or magnetic media filing. The Vendor List (Pub. 1582) contains the names of service bureaus that will produce or submit files for electronic filing or on the prescribed types of magnetic media. It also contains the names of vendors who provide software packages for payers who wish to produce electronic files or magnetic media on their own computer systems. This list is compiled as a courtesy and in no way implies IRS/ECC-MTB approval or endorsement.

.02 If filers meeting the filing requirements engage a service bureau to prepare media on their behalf, the filers should be careful not to report duplicate data, which may cause penalty notices to be generated.

.03 The Vendor List, Publication 1582, is updated periodically. The most recent revision will be available on the IRS website at www.irs.gov.

.04 A vendor, who offers a software package, or has the capability to electronically file information returns, or has the ability to produce magnetic media for customers, and who would like to be included on the list must submit a letter or email to IRS/ECC-MTB. The request should include:

.01 Transmitters are required to submit Form 4419, Application for Filing Information Returns Electronically/Magnetically, to request authorization to file information returns with IRS/ECC-MTB. A single Form 4419 should be filed no matter how many types of returns the transmitter will be submitting electronically/magnetically. For example, if a transmitter plans to file Forms 1099-INT, one Form 4419 should be submitted. If, at a later date, another type of form (Forms 1098, 1099, 5498 and W-2G) is to be filed, the transmitter does not need to submit a new Form 4419.

.02 Tape cartridge, diskette, and electronically filed returns may not be submitted to IRS/ECC-MTB until the application has been approved. Please read the instructions on the back of Form 4419 carefully. Form 4419 is included in the Publication 1220 for the filer’s use. This form may be photocopied. Additional forms may be obtained by calling 1-800-TAX-FORM (1-800-829-3676). The form is also available on the IRS website at www.irs.gov.

.03 Upon approval, a five-character alpha/numeric Transmitter Control Code (TCC) will be assigned and included in an approval letter. The TCC must be coded in the Transmitter “T” Record. IRS/ECC-MTB uses the TCC to identify payer/transmitters and to track their files through the processing system. The same TCC can be used regardless of the method of filing. For example, a payer may send their production data on a tape cartridge and then later file a correction file electronically. The same TCC can be used for each filing.

.04 IRS/ECC-MTB encourages transmitters who file for multiple payers to submit one application and to use the assigned TCC for all payers. While not encouraged, multiple TCCs can be issued to payers with multiple TINs. If a transmitter uses more than one TCC to file, each TCC must be reported in separate transmissions if filing electronically or on separate media if filing magnetically.

.05 If a payer’s files are prepared by a service bureau, the payer may not need to submit an application to obtain a TCC. Some service bureaus will produce files, code their own TCC in the file, and send it to IRS/ECC-MTB for the payer. Other service bureaus will prepare the file and return the file to the payer for submission to IRS/ECC-MTB. These service bureaus may require the payer to obtain a TCC, which is coded in the Transmitter “T” Record. Payers should contact their service bureaus for further information.

.06 Form 4419 may be submitted anytime during the year; however, it must be submitted to IRS/ECC-MTB at least 30 days before the due date of the return(s) for current year processing. This will allow IRS/ECC-MTB the minimum amount of time necessary to process and respond to applications. In the event that computer equipment or software is not compatible with IRS/ECC-MTB, a waiver may be requested to file returns on paper documents (See Part E, Sec. 5).

.07 Once a transmitter is approved to file electronically/magnetically, it is not necessary to reapply unless:

.08 In accordance with Regulations section 1.6041-7(b), payments by separate departments of a health care carrier to providers of medical and health care services may be reported on separate returns filed electronically or magnetically. In this case, the headquarters will be considered the transmitter, and the individual departments of the company filing reports will be considered payers. A single Form 4419 covering all departments filing electronically/magnetically should be submitted. One TCC may be used for all departments.

.09 Copies of Publication 1220 can be obtained by downloading from the IRS website at www.irs.gov.

.10 If any of the information (name, TIN or address) on Form 4419 changes, please notify IRS/ECC-MTB in writing so the IRS/ECC-MTB database can be updated. You may use our email address, mccirp@irs.gov, for basic name and address changes. IRS/ECC-MTB can not accept TIN information via email. A change in the method by which information returns are submitted is not information that needs to be updated (e.g., diskette to electronic). The transmitter should include the TCC in all correspondence.

.11 Approval to file does not imply endorsement by IRS/ECC-MTB of any computer software or of the quality of tax preparation services provided by a service bureau or software vendor.

.01 IRS/ECC-MTB encourages first time electronic or magnetic media filers to submit a test. Test files are required for filers wishing to participate in the Combined Federal/State Filing Program. See Part A, Sec. 13, for further information on the Combined Federal/State Filing Program.

.02 The test file must consist of a sample of each type of record:

.03 Use the Test Indicator “T” in Field Position 28 of the “T” Record to show this is a test file.

.04 IRS/ECC-MTB will check the file to ensure it meets the specifications of this Revenue Procedure. For current filers, sending a test file will provide the opportunity to ensure their software reflects any programming changes.

.05 Electronic tests may be submitted November 1, 2005, through February 15, 2006. See Part B, Sec. 4.03, for information on electronic test results.

.06 Tests submitted on magnetic media should be postmarked no earlier than October 1, 2005, and no later than December 1, 2005. Tests must be received at ECC-MTB by December 15 in order to be processed. Test processing will not begin until November 1. For tests filed on tape cartridge, and 3¹/₂-inch diskette, the transmitter must include the signed Form 4804 in the same package with the corresponding magnetic media. The “TEST” box in Block 1 on Form 4804 must be marked and the external media label must denote “TEST”.

.07 IRS/ECC-MTB will send a letter of acknowledgment to indicate the magnetic media test results. Unacceptable magnetic media test filers will receive a letter and/or documentation identifying the errors. Resubmission of magnetic media test files must be received by IRS/ECC-MTB no later than December 15, 2005.

.01 Form 4804, Transmittal of Information Returns Reported Magnetically, or a computer-generated substitute, must accompany all magnetic media shipments except for replacements, when Form 4804 is not always necessary (See Part A, Sec. 10).

.02 IRS/ECC-MTB allows for the use of computer-generated substitutes for Form 4804. The substitutes must contain all information requested on the original forms including the affidavit and signature line. Photocopies are acceptable, however, an original signature is required. When using computer-generated forms, be sure to clearly mark the tax year being reported. This will eliminate a telephone communication from IRS/ECC-MTB to question the tax year.

.03 Form 4804 may be signed by the payer or the transmitter, service bureau, paying agent, or disbursing agent (all hereafter referred to as agent) on behalf of the payer. Failure to sign the affidavit on Form 4804 may delay processing or could result in the files being unprocessed. An agent may sign Form 4804 if the agent has the authority to sign the affidavit under an agency agreement (either oral, written, or implied) that is valid under state law and adds the caption “FOR: (name of payer).”

.04 Although an authorized agent may sign the affidavit, the payer is responsible for the accuracy of Form 4804 and the returns filed. The payer will be liable for penalties for failure to comply with filing requirements.

.05 Multiple types of media may be submitted in a shipment. However, a separate Form 4804 must be submitted for each type of media.

.06 Current and prior year data may be submitted in the same shipment; however, each tax year must be on separate media, and a separate Form 4804 must be prepared to clearly indicate each tax year.

.07 Filers who have prepared their information returns in advance of the due date are encouraged to submit this information to IRS/ECC-MTB no earlier than January 1 of the year the returns are due. Filers may submit multiple original files by the due date as long as duplicate information is not sent in the files.

.08 Do not report duplicate information. If a filer submits returns electronically/magnetically, identical paper documents must not be filed. This may result in erroneous penalty notices being sent to the recipients.

.09 A self-adhesive external media label, created by the filer, must be affixed to each piece of magnetic media. For instructions on how to prepare an external media label, refer to Notice 210 in the forms section of this publication. If diskettes are used, be certain that only MS-DOS compatible operating systems were used to prepare the diskettes. Non MS-DOS diskettes are no longer acceptable at IRS/ECC-MTB.

.10 When submitting files include the following:

.11 IRS/ECC-MTB will not return media after successful processing. Therefore, if the transmitter wants proof that IRS/ECC-MTB received a shipment, the transmitter should select a service with tracking capabilities or one that will provide proof of delivery. Do not use special shipping containers for mailing media to IRS/ECC-MTB. Shipping containers will not be returned.

.12 IRS/ECC-MTB will not pay for or accept “Cash-on-Delivery” or “Charge to IRS” shipments of tax information that an individual or organization is legally required to submit.

.13 Payers should retain a copy of the information returns filed with IRS or have the ability to reconstruct the data for at least 3 years from the reporting due date, with the exception of:

.01 The due dates for filing paper returns with IRS also apply to magnetic media. Filing of information returns is on a calendar year basis, except for Forms 5498 and 5498-SA, which are used to report amounts contributed during or after the calendar year (but not later than April 15). The following due dates will apply to Tax Year 2005:

.02 If any due date falls on a Saturday, Sunday, or legal holiday, the return or statement is considered timely if filed or furnished on the next day that is not a Saturday, Sunday, or legal holiday.

.03 Magnetic media returns postmarked by the United States Postal Service (USPS) on or before March 1, 2006, and delivered by United States mail to the IRS/ECC-MTB after the due date, are treated as timely under the “timely mailing as timely filing” rule. Refer to the 2005 General Instructions for Forms 1099, 1098, 5498, and W-2G, When to File, located in the back of this publication for more detailed information. Notice 97-26, 1997-1 C.B. 413, provides rules for determining the date that is treated as the postmark date. For items delivered by a non-designated Private Delivery Service (PDS), the actual date of receipt by IRS/ECC-MTB will be used as the filing date. For items delivered by a designated PDS, but through a type of service not designated in Notice 2004-83, the actual date of receipt by IRS/ECC-MTB will be used as the filing date. The timely mailing rule also applies to furnishing statements to recipients and participants.

.04 Use this Revenue Procedure to prepare information returns filed electronically or magnetically beginning January 1, 2006, and postmarked no later than December 1, 2006.

.05 Media postmarked December 2, 2006 or later must have the Prior Year Data Indicator coded with a “P” in position 6 of the Transmitter “T” Record.

.01 A replacement is an information return file sent by the filer at the request of IRS/ECC-MTB because of errors encountered while processing the filer’s original file or correction file. After the necessary changes have been made, the entire file must be returned for processing along with the Media Tracking Slip (Form 9267) which was included in the correspondence from IRS/ECC-MTB. (See Note.)

.02 Magnetic Media filers will receive a Media Tracking Slip (Form 9267), listing, and letter detailing the reason(s) their media could not be processed. It is imperative that filers maintain backup copies and/or recreate capabilities for their information return files. Open all correspondence from IRS/ECC-MTB immediately.

.03 When possible, sample records identifying errors encountered will be provided with the returned information. It is the responsibility of the transmitter to check the entire file for similar errors.

.04 Before sending replacement media, make certain the following items are in place:

.05 Replacement files must be corrected and returned to IRS/ECC-MTB within 45 days from the date of the letter. Refer to Part B, Sec. 5 .05, for procedures for files submitted electronically. A penalty for failure to return a replacement file will be assessed if the files are not corrected and returned within the 45 days or if filers are notified by IRS/ECC-MTB of the need for a replacement file more than two times. A penalty for intentional disregard of filing requirements will be assessed if a replacement file is not received. (For penalty information, refer to the Penalty section of the 2005 General Instructions for Forms 1099, 1098, 5498, and W-2G.)

.01 The magnetic media filing requirement of information returns of 250 or more applies separately to both original and corrected returns.

.02 Corrections should be filed as soon as possible. Corrections filed after August 1 may be subject to the maximum penalty of $50 per return. Corrections filed by August 1 may be subject to a lesser penalty. (For information on penalties, refer to the Penalties section of the 2005 General Instructions for Forms 1099, 1098, 5498, and W-2G.) However, if payers discover errors after August 1, they should file corrections, as prompt correction is a factor considered in determining whether the intentional disregard penalty should be assessed or whether a waiver of the penalty for reasonable cause may be granted. All fields must be completed with the correct information, not just the data fields needing correction. Submit corrections only for the returns filed in error, not the entire file. Furnish corrected statements to recipients as soon as possible.

.03 There are numerous types of errors, and in some cases, more than one transaction may be required to correct the initial error. If the original return was filed as an aggregate, the filers must consider this in filing corrected returns.

.04 The payee’s account number must be included on all correction records. This is especially important when more than one information return of the same type is reported for a payee. The account number is used to determine which information return is being corrected. It is vital that each information return reported for a payee have a unique account number. See Part D, Sec. 6, Payer’s Account Number For Payee.

.05 Corrected returns may be included on the same media as original returns; however, separate “A” Records are required. Corrected returns must be identified on Form 4804 and the external media label by indicating “Correction.” If filers discover that certain information returns were omitted on their original file, they must not code these documents as corrections. The file must be coded and submitted as originals.

.06 If a payer realizes duplicate reporting has occurred, IRS/ECC-MTB should be contacted immediately for instructions on how to avoid notices. The standard correction process will not resolve duplicate reporting.

.07 If a payer discovers errors that affect a large number of payees, in addition to sending IRS the corrected returns and notifying the payees, IRS/ECC-MTB underreporter section should be contacted toll-free 1-866-455-7438 for additional requirements. Corrections must be submitted on actual information return documents or filed electronically/magnetically. Form 4804 must be submitted with corrected files submitted magnetically. If filing magnetically, provide the correct tax year in Block 2 of Form 4804 and on the external media label. All references to Form 4804 in the guidelines apply only to files submitted magnetically. Form 4804 is not required for electronic filing.

.08 Prior year data, original and corrected, must be filed according to the requirements of this Revenue Procedure. If submitting prior year corrections, use the record format for the current year and submit on separate media. However, use the actual year designation of the correction in Field Positions 2-5 of the “T”, “A”, and “B” Records. If filing electronically, a separate transmission must be made for each tax year.

.09 In general, filers should submit corrections for returns filed within the last 3 calendar years (4 years if the payment is a reportable payment subject to backup withholding under section 3406 of the Code and also for Form 1099-C, Cancellation of Debt).

.10 All paper returns, whether original or corrected, must be filed with the appropriate service center. IRS/ECC-MTB does not process paper returns.

.11 If a payer discovers an error(s) in reporting the payer name and/or TIN, write a letter to IRS/ECC-MTB (See Part A, Sec. 3) containing the following information:

.12 The “B” Record provides a 20-position field for a unique Payer’s Account Number for Payee. If a payee has more than one reporting of the same document type, it is vital that each reporting have a unique account number. This number will help identify the appropriate incorrect return if more than one return is filed for a particular payee. Do not enter a TIN in this field. A payer’s account number for the payee may be a checking account number, savings account number, serial number, or any other number assigned to the payee by the payer that will distinguish the specific account. This number should appear on the initial return and on the corrected return in order to identify and process the correction properly.

.13 The record sequence for filing corrections is the same as for original returns.

.14 Review the chart that follows. Errors normally fall under one of the two categories listed. Next to each type of error is a list of instructions on how to file the corrected return.